Showers usually fall under three types and the shower door you select mainly depends on the design. There are bathtub showers, walk-in enclosures found in a corner and alcove stand-alone stalls.
A 4th type, barrier-free showers, is a subset of alcove showers or corner showers. This kind of installation has a doorless design with a modern look. It can likewise offer a smooth entry to enhance ease of access for wheelchairs.
In addition to the kind of shower enclosure you have, you'll require to consider the restroom's design, the dimensions of the opening and the readily available space around the shower to identify the instructions in which the door opens.
Bypass or Sliding Doors
Bypass or sliding shower doors are a common service for a small bathroom or tub showers.
- Consist of 2 and sometimes three panels that move along each other on tracks
- Sliding door operation needs no flooring area for opening door
- Ideal for large openings, with a typical opening of 60-inches wide
- Some designs are created for alcove walk-in showers
Pivot or Hinged Doors
Hinged shower doors swing open from a single side on corner or alcove walk-ins.
- Ideal for openings that are too narrow to accommodate a bypass door
- Can be combined with inline fixed panels in broad alcove enclosures
- Some designs have hinges to permit door to swing both inward and external
Round Doors
Round shower doors are a space-saving alternative for corner walk-in shower stalls.
- Ideal for corner standalone showers
- Often reversible for right or left access
- Open by slider or style can have a bypass operation or hinged opening
- Curved glass style lowers the shower's footprint in the restroom
- Attached to the top and bottom of the frame for stability and smooth operation
Neo-Angle Doors
Neo-angle doors are created to fit neo-angle shower enclosures for corner setups.
- Take up less flooring space than a rectangular shape style
- Some models have reversible doors for left or right entry
Barrier-Free
Barrier-free showers have a set door panel near the shower head.
- Fixed door panel guards spray from the restroom flooring, but no door at the opposite end
- Design can make a bathroom feel bigger and contemporary
- Opening is typically larger than conventional shower doors, supplying much easier access for those who need it
Measurements and Measuring
Precise measuring is essential to make sure a proper suitable for your shower door.
Many brand-new shower doors can be adjusted a little to fit a variety of openings and accommodate walls that aren't completely square. Nevertheless, the door you select need to extremely closely match both the width and height of your shower's opening.
Tip: If the enclosure location is new, do not take any measurements until the shower is complete and the walls are finished. Product on the wall, such as backerboard and tile, can lower the wall-to-wall width by as much as 1-inch on each side.
Follow these actions for accurate measuring:
- Measure the opening width. If these differ, pick a door using the larger width for a bypass door or the smaller width for a pivot door.
Identify the range from the top of the tub edge or shower base to the top of the wall system or tile wall where you want the door to be situated. Select a door with a height less than or equivalent to the smallest of these measurements.
Idea: Single panel doors are seldom wider than 36-inches wide. For larger openings, pair a door with a fixed inline panel.
If you are considering a hinged door, make sure that the door has space to swing open without striking any obstructions. Extend a measuring tape to the width of the door. Hold one end of the tape where the door hinge will be located and pivot the other end to guarantee there is clearance for opening.
Frame Design
Shower doors are framed or frameless.
Framed doors
- Have aluminum, stainless-steel or composite material framing the glass panel
- Include a track that collects and traps water, needing routine cleansing
- Framed pivot shower doors just open external
- A variety of finishes are readily available to match your decoration
Frameless doors
- Have a more recent design style with through-the-glass mounted hardware and various see here thicknesses of glass
- Easier to keep clean
- Create a sensation of spaciousness
- Frameless pivot doors typically can open in or out
Glass
The thickness of the glass in your shower door depends on structural and design factors, such as whether the door is framed or frameless. Glass density isn't a problem for framed doors since the glass is protected in a metal frame. Generally, the thicker and heavier the glass is, the more stable and smoother sliding the door will be.
Clear glass shower doors showcase tile and stonework in the shower and can make the small area of your restroom feel bigger.
Frosted, textured or patterned glass shower doors use varying levels of privacy and can add a stylish aspect to the bathroom.
Pacific Mirror & Glass LLC is Kauai's Glass Shop for Mirrors, Shower Enclosures, Storefront Glass, Glass Railings, Sliding Patio Doors and more.
For more information contact:
Pacific Mirror & Glass LLC
5675 Kawaihau Rd Ste B2
Kapaa, HI 96746
(808) 635-9696
https://www.pacificmirrorandglass.com/